Sandblasting-Painting

Sandblasting-Painting

We have opened the doors of our Steel Service in Yalova in 2016 by our understanding that we can always offer a better service to our customers, with the same quality principles and our experience of more than 30 years. Based on the intention to contribute domestic production, our “Customer Focused” service understanding, which aims to meet the needs of our customers with the fastest way possible, is continuing with our 2016 built domestic sheet metal, profile and pipe sandblasting and painting facilities.

  SANBLASTING AND PAINTING FACILITY
Max. Size range 3100mm(width) – 14000mm (length)
Min. Thickness 5mm

Our Shot Blasting & Painting Facility consists of 4 stages;

Pre-Heating
Due the fact that the sheets are damp and wet during the winter time, the steel grits and dusts in the system become muddy and stick together, because of the moisture. Therefore, in this circumstances, It becomes impossible to have SA 2,5 surface quality. In this context, Pre-Heating process in our unit is of great importance.

Blasting

As specified in above, we perform shotblasting of all kinds of Sheet, Profile and Pipes (within max. size range and min. thickness.) With its 8 turbines placed at suitable angles, we obtain SA 2,5 surface quality at every point including all recesses and protrusions of the material.

Painting

As there are 2 automatic painting robots in the unit, both the upper and lower surfaces of the material are treated simultaneously. Due to the automatic sensors in painting robots, extra paint waste is decreased to about 5%. Furthermore, according to our customers’ requests, 15-25 micron paint thickness is applied.

Heating (Solvent Room)

In order to adapt the paint quality to the ambient temperature and to avoid any decrease on the paint quality, the Heating process is carried out at the speed of 2-3m/min in the Paint Heating&Drying section, which is located in the same line of the Facility.


Sandblasting-Painting

Sandblasting-Painting

We have opened the doors of our Steel Service in Yalova in 2016 by our understanding that we can always offer a better service to our customers, with the same quality principles and our experience of more than 30 years. Based on the intention to contribute domestic production, our “Customer Focused” service understanding, which aims to meet the needs of our customers with the fastest way possible, is continuing with our 2016 built domestic sheet metal, profile and pipe sandblasting and painting facilities.

  SANBLASTING AND PAINTING FACILITY
Max. Size range 3100mm(width) – 14000mm (length)
Min. Thickness 5mm

Our Shot Blasting & Painting Facility consists of 4 stages;

Pre-Heating
Due the fact that the sheets are damp and wet during the winter time, the steel grits and dusts in the system become muddy and stick together, because of the moisture. Therefore, in this circumstances, It becomes impossible to have SA 2,5 surface quality. In this context, Pre-Heating process in our unit is of great importance.

Blasting

As specified in above, we perform shotblasting of all kinds of Sheet, Profile and Pipes (within max. size range and min. thickness.) With its 8 turbines placed at suitable angles, we obtain SA 2,5 surface quality at every point including all recesses and protrusions of the material.

Painting

As there are 2 automatic painting robots in the unit, both the upper and lower surfaces of the material are treated simultaneously. Due to the automatic sensors in painting robots, extra paint waste is decreased to about 5%. Furthermore, according to our customers’ requests, 15-25 micron paint thickness is applied.

Heating (Solvent Room)

In order to adapt the paint quality to the ambient temperature and to avoid any decrease on the paint quality, the Heating process is carried out at the speed of 2-3m/min in the Paint Heating&Drying section, which is located in the same line of the Facility.


Sandblasting-Painting

Sandblasting-Painting

We have opened the doors of our Steel Service in Yalova in 2016 by our understanding that we can always offer a better service to our customers, with the same quality principles and our experience of more than 30 years. Based on the intention to contribute domestic production, our “Customer Focused” service understanding, which aims to meet the needs of our customers with the fastest way possible, is continuing with our 2016 built domestic sheet metal, profile and pipe sandblasting and painting facilities.

  SANBLASTING AND PAINTING FACILITY
Max. Size range 3100mm(width) – 14000mm (length)
Min. Thickness 5mm

Our Shot Blasting & Painting Facility consists of 4 stages;

Pre-Heating
Due the fact that the sheets are damp and wet during the winter time, the steel grits and dusts in the system become muddy and stick together, because of the moisture. Therefore, in this circumstances, It becomes impossible to have SA 2,5 surface quality. In this context, Pre-Heating process in our unit is of great importance.

Blasting

As specified in above, we perform shotblasting of all kinds of Sheet, Profile and Pipes (within max. size range and min. thickness.) With its 8 turbines placed at suitable angles, we obtain SA 2,5 surface quality at every point including all recesses and protrusions of the material.

Painting

As there are 2 automatic painting robots in the unit, both the upper and lower surfaces of the material are treated simultaneously. Due to the automatic sensors in painting robots, extra paint waste is decreased to about 5%. Furthermore, according to our customers’ requests, 15-25 micron paint thickness is applied.

Heating (Solvent Room)

In order to adapt the paint quality to the ambient temperature and to avoid any decrease on the paint quality, the Heating process is carried out at the speed of 2-3m/min in the Paint Heating&Drying section, which is located in the same line of the Facility.


Sandblasting-Painting

Sandblasting-Painting

We have opened the doors of our Steel Service in Yalova in 2016 by our understanding that we can always offer a better service to our customers, with the same quality principles and our experience of more than 30 years. Based on the intention to contribute domestic production, our “Customer Focused” service understanding, which aims to meet the needs of our customers with the fastest way possible, is continuing with our 2016 built domestic sheet metal, profile and pipe sandblasting and painting facilities.

  SANBLASTING AND PAINTING FACILITY
Max. Size range 3100mm(width) – 14000mm (length)
Min. Thickness 5mm

Our Shot Blasting & Painting Facility consists of 4 stages;

Pre-Heating
Due the fact that the sheets are damp and wet during the winter time, the steel grits and dusts in the system become muddy and stick together, because of the moisture. Therefore, in this circumstances, It becomes impossible to have SA 2,5 surface quality. In this context, Pre-Heating process in our unit is of great importance.

Blasting

As specified in above, we perform shotblasting of all kinds of Sheet, Profile and Pipes (within max. size range and min. thickness.) With its 8 turbines placed at suitable angles, we obtain SA 2,5 surface quality at every point including all recesses and protrusions of the material.

Painting

As there are 2 automatic painting robots in the unit, both the upper and lower surfaces of the material are treated simultaneously. Due to the automatic sensors in painting robots, extra paint waste is decreased to about 5%. Furthermore, according to our customers’ requests, 15-25 micron paint thickness is applied.

Heating (Solvent Room)

In order to adapt the paint quality to the ambient temperature and to avoid any decrease on the paint quality, the Heating process is carried out at the speed of 2-3m/min in the Paint Heating&Drying section, which is located in the same line of the Facility.